ADTRAN 1200214L1 Especificaciones descargar pdf (Pagina 81)

Chapter 6. DTE Port Configuration

61200214L1-20 IQ Probe User Manual 6-5

For example:

If N392=3 and N393=4, then if three errors occur within any four events,

the interface is determined inactive.

The status of the connection can be viewed in the S

TATUS

menu under

DTE P

ORT

IGNALING

TATE

. The status will return to active once the

threshold is no longer exceeded.

Management DLCI (MGMT DLCI)

To use local PVC management, enter the management data link connec-

tion identifier (DLCI). The management DLCI is a special DLCI used be-

tween the attached DTE device and the IQ Probe to carry SNMP and

Telnet packets to/from the IQ Probe on the DTE port.

Guidelines for Configuring Management DLCI

If the attached router or FRAD is used to route SNMP/Telnet frames to the

IQ Probe, set the Management DLCI to a unique value (between 16 and

1007) that identifies the virtual circuit between the router/FRAD and the

IQ Probe. The router/FRAD must also be configured to route the IQ Probe

IP address to this DLCI. The IP address and subnet mask for the DTE port

must also be set in the S

YSTEM

ONFIGURATION

menu.

Management PVC Option (MGMT PVC OPT)

If this option is set to E

NABLED

, the management DLCI is included in the

Full Status response to the router. Enable this option when the manage-

ment DLCI is used to route management traffic to the IQ Probe.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 175 176

Sin comentarios

ADTRAN 1200214L1 Especificaciones Pagina 81