ADTRAN 1200214L1 Especificaciones descargar pdf (Pagina 37)

Chapter 2. Installation

61200214L1-20 IQ Probe User Manual 2-3

REAR PANEL

Connectors for the IQ Probe are located on the rear panel. The DTE and

DCE connectors provide DTE DB-25 interfaces. These connectors can be

cabled to V.35 or X.21 interfaces (using optional ADTRAN adapter cables)

or to an EIA-232 or EIA-530 interface (using a standard DB-25 cable). Part

numbers for the optional cables follow:

The DBU option card slot, control port, 10BaseT LAN port, IEC power re-

ceptacle, and power switch are also found on the rear panel. Connector pin

assignments are listed in Pinouts on page A-1. The IQ Probe rear panel is

shown in Figure 2-1 on page 2-4 with an optional DBU card installed. The

connectors are described in the sections following the figure.

DB-25 to V.35 male adapter cable: 1200281L1

DB-25 to V.35 female adapter cable: 1200285L1

DB-25 to female DB-15 (X.21) adapter cable: 1200282L1

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 175 176

Sin comentarios

ADTRAN 1200214L1 Especificaciones Pagina 37