ADTRAN 1200214L1 Especificaciones descargar pdf (Pagina 36)

Chapter 2. Installation

2-2 IQ Probe User Manual 61200214L1-20

The following items are included in ADTRAN shipments of DBU cards:

•DBU card

• An 8-position modular to 8-position modular cable for the 4-wire

SW56 and ISDN DBU options or an 8-position modular to 4-position

modular cable for the V.34 DBU option

Customer Provides

You must provide male interface cables for the DTE and DCE ports. Use a

standard DB-25 cable for EIA-232 or EIA-530, or use an optional ADTRAN

adapter cable for X.21 or V.35. Part numbers for the optional cables are giv-

en later in this chapter in the section Rear Panel on page 2-3.

For SNMP management not accessed through the DTE or DCE port, you

must provide access to the IQ Probe either through a SLIP port, Async PPP

port (requires a male 25-pin D-type connector), or a 10BaseT ethernet port.

See Pinouts on page A-1 for the pin assignments of the control port (for

SLIP and Async PPP) and the ethernet port.

Power Up

The IQ Probe is provided with an IEC-type 8-foot power cord, terminated

by a three-prong plug which connects to a grounded power receptacle

with supply voltage from 90-240 VAC.

For international applications, please use the appropriate IEC

adapter cable for power connection.

Power to the IQ Probe must be provided from a grounded 90-240

VAC, 50/60 Hz receptacle.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 175 176

Sin comentarios

ADTRAN 1200214L1 Especificaciones Pagina 36