ADTRAN Stub Routing Especificaciones descargar pdf (Pagina 357)

100

101

Command Reference Guide DSX-1 Interface Configuration Command Set

snmp trap line-status

Use the snmp trap line-status command to control the Simple Network Management Protocol (SNMP)

variable dsx1LineStatusChangeTrapEnable (RFC 2495) to enable (or disable) the interface to send SNMP

traps when there is an interface status change. The dsx1LineStatusChangeTrapEnable variable is set to

enabled by default.

Syntax Description

No subcommands

Default Values

By default, the dsx1LineStatusChangeTrapEnable OID is set to enabled for all interfaces except virtual

frame relay interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: T1 (t1 1/1), DSX-1 (t1 1/2), serial (ser 1/1), DDS (dds

1/1), virtual frame relay interfaces (fr 1), and virtual PPP interfaces (ppp 1).

Command History

Release 1.1 Command was introduced

Functional Notes

The

snmp trap line-status

command is used to control the RFC 2495 dsx1LineStatusChangeTrapEnable OID

(OID number 1.3.6.1.2.1.10.18.6.1.17.0).

Usage Examples

The following example disables the line-status trap on the DSX-1 interface:

(config)#

interface t1 1/2

(config-t1 1/2)#

no snmp trap line-status

1 2 ... 352 353 354 355 356 357 358 359 360 361 362 ... 567 568

Comentarios a estos manuales

Sin comentarios

ADTRAN Stub Routing Especificaciones Pagina 357

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADTRAN Stub Routing