ADTRAN Stub Routing Especificaciones descargar pdf (Pagina 234)

100

101

Global Configuration Mode Command Set Command Reference Guide

snmp-server host <address> traps <community> <trap type>

Use the snmp-server host traps command to specify traps sent to an identified host. Use multiple

snmp-server host traps commands to specify all desired hosts. Use the no form of this command to return

to the default value.

Syntax Description

Specifies the IP address of the SNMP host that receives the traps.

Specifies the community string (used as a password) for authorized agents to

obtain access to SNMP information.

*Optional

Specifies the type of notification trap to enable. Leaving this option blank

enables ALL system traps.

snmp

Enables a subset of traps specified in RFC 1157.

The following traps are supported:

coldStart

warmStart

linkUp

linkDown

authenticationFailure

Default Values

By default, there are no hosts or traps enabled.

Command Modes

(config)# Global Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example sends all SNMP traps to the host at address

190.3.44.69

and community string

My Community

(config)#

snmp-server host 190.3.44.69 traps My Community snmp

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 567 568

Comentarios a estos manuales

Sin comentarios

ADTRAN Stub Routing Especificaciones Pagina 234

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADTRAN Stub Routing