ADTRAN Stub Routing Especificaciones descargar pdf (Pagina 330)

100

101

DDS Interface Configuration Command Set Command Reference Guide

loopback [ dte | line | remote ]

Use the loopback command to initiate a specified loopback on the interface. Use the no form of this

command to deactivate the loop.

Syntax Description

dte

Initiates a loop to connect the transmit and receive path through the unit.

line

Initiates a loop of the DDS circuit towards the network by connecting the transmit

path to the receive path.

remote

Transmits a DDS loop code over the circuit to the remote unit. In response, the

remote unit should initiate a line loopback.

Default Values

No default values necessary for this command.

Command Modes

(config-dds 1/1)# 56K/64K (DDS) Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example activates a line loopback on the DDS interface:

(config)#

interface dds 1/1

(config-dds 1/1)#

loopback line

1 2 ... 325 326 327 328 329 330 331 332 333 334 335 ... 567 568

Comentarios a estos manuales

Sin comentarios

ADTRAN Stub Routing Especificaciones Pagina 330

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADTRAN Stub Routing