ADTRAN Stub Routing Especificaciones descargar pdf (Pagina 356)

100

101

DSX-1 Interface Configuration Command Set Command Reference Guide

signaling-mode [ message-oriented | none | robbed-bit ]

Use the signaling-mode command to configure the signaling type (robbed-bit for voice or clear channel

for data) for the DS0s mapped to the DSX-1 port.

Syntax Description

message-oriented

Clear channel signaling on Channel 24 only. Use this signaling type with QSIG

installations.

none

Clear channel signaling on all 24 DS0s. Use this signaling type with data-only or

PRI DSX-1 installations.

robbed-bit

Robbed bit signaling on all DS0s. Use this signaling type for voice-only DSX-1

applications.

Default Values

By default, the signaling mode is set to robbed-bit.

Command Modes

(config-t1 1/2)# DSX-1 Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example configures the DSX-1 port for PRI compatibility:

(config)#

interface t1 1/2

(config-t1 1/2)#

signaling-mode none

1 2 ... 351 352 353 354 355 356 357 358 359 360 361 ... 567 568

Comentarios a estos manuales

Sin comentarios

ADTRAN Stub Routing Especificaciones Pagina 356

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADTRAN Stub Routing