ADTRAN 1204006L1 Manual de usuario descargar pdf (Pagina 96)

Chapter 7. DTE Port Configuration

7-20 Express 5210 User Manual 61200208L1-1

Physical Layer Options (PHYS LYR OPTS)

Interface Type (INTERFACE)

Select the connector type for the

DTE interface. The choices are

EIA-232

and

V.35

Bit Rate

Set the operating speed of the

DTE interface to match the connected

device.

Data Bits

Set the byte length to match the connected asynchronous device.

The choices are

and

Parity

Select even, odd, or no parity information. Set to match the

connected asynchronous device.

Stop Bits

Select one or two stop bits. Set to match the connected

asynchronous device.

Hardware Flow Control

When set to

the Express 5210 disables CTS, temporarily

stopping the data being transmitted from the DTE device to the

Express 5210.

The bit rate selections vary depending on the speed selections made for the

Network

port. Also, for rates higher than 56/64 kbps, the External DCE

card is required.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 202 203

Sin comentarios

ADTRAN 1204006L1 Manual de usuario Pagina 96