ADTRAN 1204006L1 Manual de usuario descargar pdf (Pagina 91)

Chapter 7. DTE Port Configuration

61200208L1-1 Express 5210 User Manual 7-15

Bit Rate

Select the operating speed to match the DTE device connected to

the Express 5210.

Data Bits

Select the byte length to match the DTE device connected to the

Express 5210. The choices are

and

Parity

Select even, odd, or no parity information. Set to match the DTE

device connected to the Express 5210.

Stop Bits

Select one or two stop bits. Set to match the DTE device connected

to the Express 5210.

Hardware Flow Control

When set to

the Express 5210 disables CTS, temporarily

stopping the data being transmitted from the DTE device to the

Express 5210.

Protocol Options (PROTOCOL OPTS)

Frame Size (FRM SIZE) and Max Idle Count (MAX IDLE)

The values assigned to these fields determine when a block of

asynchronous data becomes a frame. Whichever value is reached

first determines when the frame is formed. If, for example, 7 is the

selected

RAME

IZE

and 3 is the

DLE

OUNT

, then a frame is

formed once the Express 5210 receives either 7 characters or 3 idle

characters (whichever comes first).

Address Table (ADDR TABLE)

Far End Port Number (FAR END PORT)

Enter the port number (DTE 1 or DTE 2) connecting the remote

ADTRAN frame relay product to the remote async device.

Outgoing DLCI (OUT DLCI)

Enter the DLCI address that identifies the virtual circuit used to

connect with the remote ADTRAN frame relay product.

The bit rate selections vary depending on the speed selections made for the

Network

port. Also, for rates higher than 56/64 kbps, the External DCE

card is required.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 202 203

Comentarios a estos manuales

Sin comentarios

ADTRAN 1204006L1 Manual de usuario Pagina 91

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADTRAN 1204006L1