ADTRAN 1204006L1 Manual de usuario descargar pdf (Pagina 86)

Chapter 7. DTE Port Configuration

7-10 Express 5210 User Manual 61200208L1-1

Slow Poll Ratio (POLL RATIO)

Determine how often devices on the Slow Poll list are polled. This

list is automatically managed based on poll timeouts. Initially, all

PUs are on the Normal list. When a PU times out a fixed number

of times, it is moved to the Slow Poll list. A PU remains on this list

until it responds properly to a poll.

The number entered is the number of times PUs on the Normal list

are polled before PUs on the Slow Poll list are polled. Enter

disable this option.

Disconnect Threshold (THRESHOLD)

Set the maximum number of response timeouts allowed before a

session is terminated.

Transmit Delay (TX DELAY)

Set the minimum time between transmission frames.

CTS Option

Set the Express 5210

CTS

PTION

OLLOW

RTS

or to be

ORCED

Data Format (FORMAT)

Set the

ATA

ORMAT

to match the attached controller or FEP line

coding. The choices are non-return-to zero (

NRZ

) and non-return-

to-zero inverted (

NRZI

When using

NRZI

format, the Express 5210 does not derive timing

from the receive data input.

Address Table (ADDR TABLE)

PU Address

Enter the physical unit address of each SDLC device you wish to

connect to the Express 5210.

Group Address (GROUP ADDR)

Enter the address used for group polling. With this address, the

host can poll the Express 5210 for information on all units

connected to the Express 5210. This address should match the

host's group address. Set this entry to 0 to disable group polling for

the

DTE port.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 202 203

Comentarios a estos manuales

Sin comentarios

ADTRAN 1204006L1 Manual de usuario Pagina 86

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADTRAN 1204006L1