ADTRAN 1204006L1 Manual de usuario descargar pdf (Pagina 32)

Chapter 2. Installation

2-2 Express 5210 User Manual 61200208L1-1

ADTRAN shipments of DBU cards include the following:

• DBU card

• An 8-position modular to 8-position modular cable for the

4-wire SW56 and ISDN DBU cards, or

• An 8-position modular to 4-position modular cable for the V.34

DBU card.

ADTRAN shipments of voice cards include the following:

• Dual voice card

• Two 8-position modular to 8-position modular cables (for the

E&M and FXO cards), or

• Two 4-position modular to 4-position modular cables (for the

FXS card)

Customer Provides

The customer provides an interface cable for each port used. Each

cable should be either an EIA-232 with a standard 25-pin male

D-type connector or a V.35 cable. V.35 requires an ADTRAN

adapter cable (part numbers: male 1200193L1; female 1200194L1).

Power Up

Each Express 5210 unit is provided with a captive eight-foot power

cord, terminated by a three-prong plug which connects to a

grounded 115 VAC power receptacle.

REAR PANEL

The Express 5210 is equipped with a DB-25 connector labeled DTE.

Connections to the dedicated circuit and VT 100 interface are

provided through the 8-pin telco jacks labeled

TELCO and

Power to the Express 5210 must be provided from a grounded 115 VAC,

60 Hz receptacle.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 202 203

Sin comentarios

ADTRAN 1204006L1 Manual de usuario Pagina 32