ADTRAN TA 544 Manual de instrucciones descargar pdf (Pagina 73)

Total Access 544R System Manual Section 4 SHDSL RCU ATM User Interface Guide

ROUTER > CONFIG > UDP RELAY > UDP RELAY LIST

Up to four relay destination servers can be specified in this list.

ROUTER > STATUS

View the IP ROUTES, IP STATS, and ARP CACHE statistics from this menu.

ROUTER > STATUS > IP ROUTES

This lists the contents of the unit’s IP route table.

ROUTER > STATUS > IP ROUTES > IP ADDRESS

Network or host destination address.

ROUTER > STATUS > IP ROUTES > NETMASK

Network mask applied to the destination address.

ROUTER > STATUS > IP ROUTES > GATEWAY

Host or router to receive this packet.

ROUTER > STATUS > IP ROUTES > PORT

Port gateway is located on:

Indicates the entry number in the UDP Relay List table.

RELAY ADDRESS

This is the IP address of the server that will receive the relay packet. Default is 0.0.0.0.

UDP PORT TYPE

The choices are STANDARD (def) and SPECIFIED. The following standard UDP protocols are relayed

when set: DHCP, TFTP, DNS, NTP (Network Time Protocol, port 123), NBNS (NetBios Name

Server, port 137), NBDG (NetBIOS Datagram, port 138), and BootP. When

SPECIFIED is set, the

UDP port (1 to 65535) can be specified in the UDP Port columns (up to three per server).

UDP PORT 1, 2, 3

Used for specifying UDP ports to be relayed. These fields only apply when UDP PORT TYPE is set to

SPECIFIED. Default is 0.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 161 162

Sin comentarios

ADTRAN TA 544 Manual de instrucciones Pagina 73