ADTRAN TA 544 Manual de instrucciones descargar pdf (Pagina 129)

DLP-10 Loading the Current Configuration Using TFTP

Introduction

The unit supports configuration uploads from a unit (via the 10/100BASET Ethernet port) to a TFTP server

located on the network or a TFTP server accessible across the WAN. This DLP provides the steps for a

successful configuration upload using the

10/100BASET Ethernet port and a TFTP server.

Tools and Materials Required

• A PC with a Telnet client software

• A TFTP server accessible on the local network (a TFTP server is provided with the unit as part of the

ADTRAN Utilities software) or a TFTP server accessible across the WAN

• VT100 compatible terminal or computer with terminal emulation software

• Appropriate cable to connect terminal to the unit (customer-provided)

• DB-9 female to RJ-45 female adapter for connecting to the CRAFT port on the rear of the unit. This

adapter is ADTRAN-proprietary and is shipped with the unit.

• Ethernet cable from 10/100BASET port on the unit to a hub (customer-provided)

• Use Ethernet crossover if going from the unit to a PC (customer-provided).

To prevent electrical shock, do not install equipment in a wet location or during a

lightning storm.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 161 162

Sin comentarios

ADTRAN TA 544 Manual de instrucciones Pagina 129