ADTRAN TA 544 Manual de instrucciones descargar pdf (Pagina 37)

Total Access 544R System Manual Section 4 SHDSL RCU ATM User Interface Guide

SYSTEM CONFIG > MANAGEMENT > SNMP MANAGEMENT > TRAPS

Sets up the trap manager name and IP from this menu.

SYSTEM CONFIG > MANAGEMENT > FDL MANAGEMENT

Enables the FDL management and configures mode and IP addresses from this menu.

SYSTEM CONFIG > MANAGEMENT > FDL MANAGEMENT > MODE

This enables the FDL (only in ESF mode) to be used for management. Learning mode can also be enabled

so the unit can "learn" its IP configuration to be used for its FDL management. Once it learns this

information from, for example a Total Access 4303, the configuration items populate. The factory default

ON.

SYSTEM CONFIG > MANAGEMENT > FDL MANAGEMENT > LINK IP ADDRESS

This is the local IP address used for FDL management. The FDL uses a separate IP network for

communication, distinct from the customer data that is configured under the Router menus. The factory

default is

0.0.0.0.

SYSTEM CONFIG > MANAGEMENT > FDL MANAGEMENT > IP NETMASK

This is the subnet mask defining the IP network used for FDL management. The factory default is 0.0.0.0.

NETMASK

The mask is used to determine which bits of the MANAGER IP are significant. A "0" bit means "don't

care." A "1" bit means that the corresponding address bits in the incoming SNMP packet must match

the address bit in the defined

MANAGER IP. The netmask of 255.255.255.255 defines a single IP as

the manager host IP. The default value is

0.0.0.0.

Displays the index number in the SNMP traps table.

This list allows up to 20 managers to be listed to receive traps.

MANAGER NAME is the text string describing the name of the entry. It is intended for easy reference

and has no bearing on the SNMP trap function. You can enter up to 31 characters in this field. The

factory default is no entry in the manager name field.

MANAGER IP

This is the IP address of the manager that is to receive the traps. The factory default is 0.0.0.0.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 161 162

Sin comentarios

ADTRAN TA 544 Manual de instrucciones Pagina 37