ADTRAN NetVanta 160 Manual de usuario descargar pdf (Pagina 55)

NetVanta 160 Series Wireless Configuration Guide CLI Configuration Example

15. After selecting the appropriate AP ID, select the MAC ACL you want to apply to the radio from the

MAC Access List drop-down menu.

16. After selecting the MAC ACL, apply it to the radio using the Apply button at the bottom of the menu.

The ACL is applied to the radio once the changes are applied to the AP (refer to Applying the Settings

on page 20).

17. You can save your configuration (recommended) and exit the GUI using the Save and Logout links (at

the upper right corner of your current menu).

Creating a MAC ACL Using the CLI

To create a MAC ACL through the CLI, follow these steps:

1. Boot up the unit.

2. Telnet to the unit using the format telnet <ip address>, for example: telnet 208.61.209.1

3. Enter your user name and password at the prompt.

4. Enable your unit by entering enable at the > prompt as follows:

>enable

5. Enter your Enable mode password at the prompt.

The AOS default user name is admin and the default password is password. If your

product no longer has the default user name and password, contact your system

administrator for the appropriate user name and password.

1 2 ... 50 51 52 53 54 55 56 57 58

Sin comentarios

ADTRAN NetVanta 160 Manual de usuario Pagina 55