ADTRAN NetVanta 160 Manual de usuario descargar pdf (Pagina 21)

NetVanta 160 Series Wireless Configuration Guide Configuring the AOS AP Radios

checking the box next to the appropriate AP. Next, select Configure Selected APs to apply the

configuration to the AP. You must apply the configuration to the AP, or the AP will not be configured.

Select the AP by

checking the box.

Select Configure

Selected APs to

apply the

configuration.

Figure 17. Applying the Configuration to the AP

Repeat the process for any additional APs you wish to configure or add.

Configuring the AOS AP Radios

When the AP is configured, both radios are detected and assigned an interface. Selecting Data > Wireless

> APs/Radios/VAPs > Radios tab will show both radios associated with an AP.

The radio ID is based on the interface to which the AP is mapped (dot11ap <ap/radio>, where <ap> is

the AP interface number and <radio> is the radio interface number). An asterisk beside the radio ID

indicates that the radio is enabled. Each Radio ID is a hyperlink that accesses a configuration page for the

radio’s basic and advanced settings.

If the AP is listed in red font, some or all of the AC’s configuration of the AP is pending,

and has not yet been applied to the AP.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 57 58

Sin comentarios

ADTRAN NetVanta 160 Manual de usuario Pagina 21