ADTRAN NetVanta 160 Manual de usuario descargar pdf (Pagina 29)

NetVanta 160 Series Wireless Configuration Guide Configuring AOS AP Virtual Access Points

4. Once the security settings have been entered, select Apply to add them to the VAP’s configuration on

the AC. To apply the changes to the AP, refer to Applying the Settings on page 20.

The basic parameters of the AOS AP and VAP have now been configured. For more information about

specific configurations and commands using the CLI, refer to the

AOS Command Reference Guide

available online at https://supportforums.adtran.com.

Referencing VAPs

VAP referencing is a feature that allows a single VAP configuration to serve as a reference for quickly

configuring other VAPs. This feature facilitates consistent settings across APs, which aids in smooth

transitions between APs for mobile wireless clients. The feature allows a VAP configuration to be copied

as a reference configuration for configuring other VAPs, tracks the synchronization between referenced

VAPs, and also enables quick copying of a VAP configuration to other VAPs even if it is not the reference

configuration.

Once a VAP configuration exists to use as a reference, the configuration can be copied to other VAPs either

as they are created or as they are modified.

To copy a reference configuration as a new VAP is created, follow these steps:

1. To add a VAP, select the appropriate AP, Radio interface, and VAP interface numbers. In the following

examples, VAP 1/2.1 is created by copying the VAP configuration of VAP 1/1.1.

Figure 27. VAP Referencing for a New VAP

Generated WEP keys will not be part of the VAP configuration until the Apply button

is selected.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 57 58

Sin comentarios

ADTRAN NetVanta 160 Manual de usuario Pagina 29