ADTRAN NetVanta 160 Manual de usuario descargar pdf (Pagina 10)

NetVanta 160 Series Wireless Configuration Guide Configuring the AOS AP

Step 1: AP Information

The first step of the Wireless Wizard will ask for information regarding the AP’s name, location, and the

country in which it is operated.

Figure 4. Identifying the Access Point

Use a unique name to identify this particular AP. The AP location is optional and only serves to further

identify this AP. The AP Country-Region drop-down menu specifies the country in which the AP will

operate. Countries in which the AP is certified to operate, as well as those that are not certified, are

displayed. If an uncertified country is selected, and the 802.11a radio is not allowed for that country, you

will not be able to configure the 802.11a radio. Appendix A: Supported Country-Region Radio Channels on

page 41 outlines the 802.11b/g and 802.11a support for all countries available on the drop-down menu.

Once the required information has been entered, select Next to move to Step 2.

Step 2: Enabling 802.11a Radio

Step 2 provides the settings for enabling radio 802.11a. If an 802.11a radio is not necessary for your

network, do not check the enable box; instead select Next at the bottom of the menu. Selecting Next will

take you to the enabling menu for the 802.11b/g radio, in which case proceed with Step 2 through Step 5

for the 802.11b/g radio.

If you wish to use the 802.11a radio in your network, check the enable box and enter the required

information (SSID value and broadcast mode).

The SSID Value is attached to the packet header. It consists of up to 32 case-sensitive characters and can

include spaces. SSIDs serve to differentiate WLANs from one another and VAPs from one another. They

are included in the beacon frames in plain text. To broadcast the SSID in the beacon, check the Enable

Broadcast Mode checkbox. To prevent the SSID from being broadcast, do not enable the broadcast mode.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 57 58

Sin comentarios

ADTRAN NetVanta 160 Manual de usuario Pagina 10