ADTRAN NetVanta 160 Manual de usuario descargar pdf (Pagina 40)

NetVanta 160 Series Wireless Configuration Guide Appendix A. Supported Country-Regions

CLI Configuration Example

The NetVanta 160 Series wireless APs, radios, and VAPs can also be configured using the CLI. The

following is a configuration example, that outlines the various wireless commands used to configure the

NetVanta 160 Series. This configuration is provided for example purposes only. For more information

about the commands used to configure the NetVanta 160 Series, refer to the

AOS Command Reference

Guide, available online at https://supportforums.adtran.com.

interface dot11ap 1 ap-type nv16x

access-point mac-address 00:19:92:08:93:90

name 160-9444

ip address 10.10.10.1 255.255.255.0

ip default-gateway 10.10.10.2

interface dot11ap 1/1 radio-type 802.11/jointfilesconvert/386673/bg

no shutdown

interface dot11ap 1/1.1

ssid broadcast-mode “160/jointfilesconvert/386673/bg”

security mode wpa tkip aes-ccmp psk bluesocket

no shutdown

interface dot11ap 1/2 radio-type 802.11a

radio-mode a

shutdown

interface dot11ap 1/2.1

security mode none

shutdown

end

dot11ap apply-changes all

Any settings configured or changed on the NetVanta 160 Series must be applied twice:

once to the AC controlling the AP and once to the AP itself. To apply the changes using the

CLI, enter the dot11ap apply-changes [<ap number> | all] command from the Enable

mode. You will need to exit the Global Configuration mode to apply the changes to the AP.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 57 58

Sin comentarios

ADTRAN NetVanta 160 Manual de usuario Pagina 40