ADTRAN NetVanta 160 Manual de usuario descargar pdf (Pagina 23)

NetVanta 160 Series Wireless Configuration Guide Configuring the AOS AP Radios

Selecting the Radio Mode

The Radio Mode drop-down menu specifies in which mode the radio will be operating. BG Radios can

operate in BG mode, BGN mode, or GN mode. A radios can operate in A or AN modes.

Selecting Radio Channel and Speed

Radio Channel selection sets the operating channel for the radio. The Channel can be set to zero to scan

for the best channel. Other channel options vary by radio type, but also include a Least Congested option.

The Speed selection is the minimum speed that the AP requires from a client in order to allow the client to

connect to the network. The Speed selection can be set to Best for the best available speed or to a specific

speed.

Selecting Packet Aggregation

Packet Aggregation, when enabled, increases the efficiency of frame transmission for data packets.

Enabling 40 MHz Channel Width

Enabling the 40 MHz channel width changes the width of the radio channel to 40 MHz.

Advanced Settings

The Advanced tab provides many options for radio configuration, including antenna settings and power

options.

Figure 20. Radio Configuration Advanced Tab

For optimal radio operation, most of the advanced setting defaults should remain unchanged. The default

values are described in Table 2.:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Sin comentarios

ADTRAN NetVanta 160 Manual de usuario Pagina 23