ADTRAN ATLAS 800PLUS Manual de usuario descargar pdf (Pagina 98)

Chapter 8. Dedicated Maps Terminal Menu

8-4 ATLAS 800

PLUS

User Manual 61200226L1-1

This DS0 is already used in this Dedicated

Map.

This DS0 is already used in this Dedicated

Map and conflicts with this connection.

Data Rate

Write security:3; Read security:5

Defines the data rate per DS0. If

FROM Slt

is an Nx port,

the data rate per DS0 must be set. You can choose from

64 kbps or 56 kbps.

Trunk

Conditioning

Security level: 3; Read security: 5

Sets known values in the signaling bits and the data field

for outgoing DS0s which are cross-connected to a T1 port

experiencing alarms.

The trunk conditioning process consists of a 2.5-second

transmission (indicating call termination), followed by a

continuous transmission signaling the final condition as

chosen by the user.

Trunk conditioning only applies to RBS T1s in the

dedicated map.

Fault

Signaling

Defines to ATLAS the type of signaling being

used on the trunk:

E&M

LS/GS Network or User

SW56

Custom

Fault signaling is only visible when RBS is turned

on.

Fault State

Defines the final fault signaling state:

Idle

- used for one-way trunks; that is, for out-

going or incoming calls only—not both.

Seized

- used for two-way trunks. Prevents

the PBX from attempting to use a failed trunk

for an outgoing call.

Custom

Permits users to define the Fault Signaling to

use in the form of A/B set to 1/0.

See also the trunk conditioning example on page 8-5.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 209 210

Comentarios a estos manuales

Sin comentarios

ADTRAN ATLAS 800PLUS Manual de usuario Pagina 98

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADTRAN ATLAS 800PLUS