ADTRAN ATLAS 800PLUS Manual de usuario descargar pdf (Pagina 128)

Chapter 10. Dial Plan Terminal Menu

10-16 ATLAS 800

PLUS

User Manual 61200226L1-1

QUAD T1/PRI MODULE (USER TERMINATION/RBS)

When you are working in the User Termination section of the Dial Plan

menu, the Slot is defined as a T1/PRI module, and Sig is set to RBS, the fol-

lowing configuration options are available:

»» First DS0/Number

of DS0s

Write security: 3; Read security: 5

Defines to ATLAS the DS0s which will be used for this end point. These are

the DS0s which will be used by ATLAS to send and receive calls to and from

User equipment (PBX). The incoming calls which will be accepted and the

outgoing calls which will be restricted over these DS0s are set by the Incom-

ing Call Accept and Outgoing Call Reject Numbers discussed earlier.

»» DS0s Available

Read security: 5

Indicates which DS0s of the T1 have been defined in this switched end point

(indicated by “! “), in another switched end point (indicated by “s”), or in a

Dedicated Map (indicated by “n”).

»» Signaling Method

Write security: 3; Read security: 5

Defines to ATLAS the type of signaling to be used across this trunk. The sig-

naling selected needs to match that being used by the user equipment (PBX).

The available options include E&M Immediate, E&M Wink, Loop Start, and

Ground Start.

»» Direct Inward

Dialing

Write security: 3; Read security: 5

Defines to ATLAS whether DID is being used by the Network. This option

only displays if Direct Inward Dialing (DID) is set to Enabled. If DID is

Enabled, then the following information must be defined:

ATLAS converts signaling types between Network and User

Terminations.

DID Digits

Transferred

Write security: 3; Read security: 5

Defines the number of digits sent to ATLAS from the Net-

work if DID is used.

DID Prefix

Write security: 3; Read security: 5

Defines to ATLAS the prefix digits which are not received as

a part of the DID number. ATLAS uses the combination of

prefix and DID number to determine the User end point

that should receive the incoming call.

If DID is Disabled, then you must define the trunk number.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 209 210

Comentarios a estos manuales

Sin comentarios

ADTRAN ATLAS 800PLUS Manual de usuario Pagina 128

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADTRAN ATLAS 800PLUS