ADTRAN ATLAS 800PLUS Manual de usuario descargar pdf (Pagina 41)

Chapter 2. Installing the ATLAS 800PLUS

61200226L1-1 ATLAS 800

PLUS

User Manual 2-7

Ethernet 10BaseT Connection

The 10BaseT Ethernet port (RJ-48C) provides an Ethernet LAN connection,

which is used for TFTP, SNMP, and Telnet connection.

Connection

The network connection follows, with the pinout shown in Table 2-4.

MON

The MON (monitor) test jack provides a bridged access jack for non-intru-

sive monitoring of the T1 circuits receiving data. When connected to this

jack, the test equipment should be configured for a bridged termination.

Option Slots

Figure 2-3 shows the option slot numbering designation, as viewed from the

rear of the ATLAS 800

PLUS

. All slots are functionally identical except slots

seven and eight, which can also accommodate an optional power supply for

redundancy.

Connector type (USOC) RJ-48C

Part number AMP# 555164-2

Table 2-4. Ethernet 10BaseT Pinout

PIN NAME DESCRIPTION

1 TX1 Transmit Positive

2 TX2 Transmit Negative

3 RX1 Receive Positive

4 & 5 UNUSED —

6 RX2 Receive Negative

7 & 8 UNUSED —

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 209 210

Sin comentarios

ADTRAN ATLAS 800PLUS Manual de usuario Pagina 41