ADTRAN Tracer TRACER 2 x E1 Guía de usuario Pagina 210

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 319
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 209
Ethernet Tools
198 AXS-200/805/855
Trace Route Configuration
Trace Route Configuration
Trace Route is used to obtain the list of all hops identified between the
local port (AXS-200/855 ) and the destination IP port.
Press , select ETHERNET, Tools, Trace Route, and the Configuration
tab.
³ IP Address: Enter the IP address of
the network device to be detected.
The accepted range for IPv4 is
0.0.0.0 to 255.255.255.255. The
default value is 0.0.0.0.
The acceptable range for IPv6 is
from
000:0000:0000:0000:0000:0000:0
000:0001 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF.
When the IP Address field is
selected for editing, the Latest
IP’s button appears on the bottom
of the screen. Press the
corresponding function key to
display the list of previously
configured IP addresses. Select
the desired IP address from the
list, if any.
³ Timeout (ms): Enter the
maximum time allowed between an ICMP echo and response at each
hop. Choices are 200 ms to 10000 ms. The default setting is 4000 ms.
³ Max Hop Count: Enter the maximum network device the packet is
allowed to go through. Choices are 1 to 255. The default setting is 128.
Vista de pagina 209
1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 318 319

Comentarios a estos manuales

Sin comentarios