ADTRAN Tracer TRACER 2 x E1 Manual de usuario Pagina 87

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 128
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 86
show interfaces (T1, E1, or DS)
Syntax show interfaces interface-type
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>
Release Information Command introduced before Junos OS Release 7.4.
Description Display status information about the specified T1, E1, or DS interface.
Options interface-type—On ACX Series, M Series, MX Series, and T Series routers, the T1 interface
type is t1-fpc/pic/port, whereas the E1 interface type is e1-fpc/pic/port, and DS
interface type is ds-fpc/pic/port:<channel>. On the J Series routers, the T1 interface
type is t1-pim/0/port, whereas the E1 interface type is e1-pim/0/port.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
Required Privilege
Level
view
Related
Documentation
Understanding Interfaces on ACX Series Universal Access Routers
List of Sample Output show interfaces (T1, IMA Link) on page 87
show interfaces (T1, PPP) on page 88
show interfaces detail (T1, PPP) on page 88
show interfaces extensive (T1 CRC Errors) on page 89
show interfaces extensive (T1, PPP) on page 89
show interfaces (E1, Frame Relay) on page 91
show interfaces detail (E1, Frame Relay) on page 92
show interfaces extensive (E1, Frame Relay) on page 93
show interfaces (E1, IMA Link) on page 95
show interfaces extensive (T1, TDM-CCC-SATOP) on page 96
show interfaces extensive (DS, TDM-CCC-CESoPSN) on page 97
Output Fields Table 5 on page 76 lists the output fields for the show interfaces (T1 or E1) command.
Output fields are listed in the approximate order in which they appear.
75Copyright © 2014, Juniper Networks, Inc.
Chapter 5: Monitoring Commands
Vista de pagina 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 127 128

Comentarios a estos manuales

Sin comentarios