
show interfaces (Channelized E1 IQ)
Syntax show interfaces (ce1-fpc/pic/port | type-fpc/pic/port<:channel>)
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>
Release Information Command introduced before Junos OS Release 7.4.
Description (M Series and T Series routers only) Display status information about the specified
channelized E1 IQ interface.
Options type-fpc/pic/port:<channel>—Interface type with optional corresponding channel levels.
For the physical channelized E1 IQ interface, type is ce. For the clear channel, type
is e1. At the first level of channelization, type is ds.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
Required Privilege
Level
view
List of Sample Output show interfaces (Channelized E1 IQ) (Physical) on page 71
show interfaces extensive (Channelized E1 IQ Multilink PPP Encapsulation) on page 72
show interfaces extensive (Channelized E1 IQ MLFR Encapsulation) on page 73
show interfaces detail (Clear Channel E1) on page 74
Output Fields For information about output fields, see the output field table for the show interfaces
(Channelized E1) command. Output fields are listed in the approximate order in which
they appear.
Sample Output
show interfaces (Channelized E1 IQ) (Physical)
user@host> show interfaces ce1-1/2/3
Physical interface: ce1-1/2/3, Enabled, Physical link is Up
Interface index: 18, SNMP ifIndex: 1128
Link-level type: Frame-relay, Controller, MTU: 1504, Clocking: Internal, Speed:
E1, Loopback: None, FCS: 16, Framing: G704, Parent: None
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Link flags : Keepalives DTE
ANSI LMI settings: n391dte 6, n392dte 3, n393dte 4, t391dte 10 seconds
71Copyright © 2014, Juniper Networks, Inc.
Chapter 5: Monitoring Commands
Comentarios a estos manuales