ADTRAN MX2800 M13 Manual de usuario descargar pdf (Pagina 141)

Section 9, Transaction Language 1 (TL1) - TL1 Error Codes

61200290L1-1H 9-17

NOTE

<aid> and <ctag> are optional parameter. The placemarker: must

remain in place. The default <aid> is All. The default <ctag> is 1.

TL1 Editing Examples:

ED-T1:UNIT-1:106:1:::LBO=133TO266; (This would edit line build out for T1 #6 to be 133 to

266.)

ED-T2:UNIT-1:205:2:::DS2CFGMODE=T1; (This would configure T2 #5 for T1 mode versus

E1.)

ED-T3:UNIT-1:300:3:::DS3MAXNUMSW=3; (This would set maximum number of switches for

controller cards to 3.)

ED-EQPT:UNIT-1:400:4:::PSTEMPCRITRLY=Y; (This would enable the alarm relay for power

supply temperature critical.)

To view the value of a parameter, a retrieve (RTRV) command is used. The standard format for

the RTRV command is as follows:

RTRV-rr:<tid>:<aid>:<ctag>:::<keyword>;

The parameter descriptions are as follows:

• rr is T1, T2, T3, or EQPT

• <tid> is the Target Identifier

• <aid> is the Access Identifier

• <ctag> is a 1 to 6 character correlation tag (echoed in response)

• <keyword> is one of the entries from the data dictionaries in Table 9-6, Table 9-7,

Table 9-8, or Table 9-9.

NOTE

<aid> and <ctag> are optional parameter. The placemarker : must

remain in place. The default <aid> is All. The default <ctag> is 1.

TL1 RTRV examples:

RTRV-R1::109:4; (This would return the values for all parameters related to T1 #9.)

NOTE

If no parameter is specified, all valid parameters to the <aid> are

retrieved.

RTRV-T1:UNIT-1:106:1:::LBO; (This would return the value of line build out for T1 #6.)

RTRV-T2:UNIT-1:205:2:::DS2CFGMODE; (This would return the configuration mode of T2 #5.)

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 197 198

Sin comentarios

ADTRAN MX2800 M13 Manual de usuario Pagina 141