
Chapter 3. Terminal Menu Operation and Structure
61200176L1-1 Express 6100/6120 User Manual 3-39
that particular router’s protocol packets are bridged. A setting ofNo
means that no bridging will occur.
Bridge Map/Bridge Group
Write security:3, Readsecurity: 5
The bridge group that this DLCI is part of is specified here as Group
1 or Group 2. Thesegroupscorrespondtothespanningtreeprotocols
Bridge Group 1 and Bridge Group 2.
DLCI Mapping/Filters
The Express 6100/6120can block packets in and outof a PVC port by
use of the filters. They are set up in two steps: 1) define the types of
packets thatwouldbeofinterestintheConfiguration/Security/Filter
Defines menu,and2)setupthefiltertypeandcombinationofdefines
that will cause a packet block.
Filters/In from PVC
Write security:2; Readsecurity: 5
The packets whichcome into the Express6100/6120 via thisPVC can
be filtered in three ways:
Disabled
(def)
Turns off packet input filtering. No incoming
packetsfromthisPVCareblocked.
Block All AllincomingpacketsfromthisPVCareblocked
except as defined in the Filters/In Exceptions
list.
Forward All All incoming packets from this PVC are not
blocked except as defined in the Filters/In Ex-
ceptions list.
Comentarios a estos manuales