Adtran 1000R Series Manual de usuario descargar pdf (Pagina 44)

Command Reference Guide Enable Mode Command Set

clear counters port-channel <interface id>

Use the clear counters port-channel command to reset counters on the specified port channel.

Syntax Description

<interface id> Specifies a valid interface ID to clear (e.g., 1 for port channel 1).

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, and 1000R Series units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example clears all counters for port channel 1:

>enable

#clear counters port-channel 1

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 136 137

Sin comentarios

Adtran 1000R Series Manual de usuario Pagina 44