Adtran 1000R Series Manual de usuario descargar pdf (Pagina 113)

Command Reference Guide Enable Mode Command Set

debug hdlc [errors | verbose]

Use the debug hdlc command to activate debug messages associated with the high-level data link control

(HDLC) interface. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no

form of this command to disable the debug messages.

Syntax Description

errors Enables protocol error and statistic messages.

verbose Enables detailed debug messages.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.

Command History

Release 9.1 Command was introduced.

Usage Examples

The following example activates detailed debug messages associated with the HDLC interface:

>enable

#debug hdlc verbose

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 136 137

Sin comentarios

Adtran 1000R Series Manual de usuario Pagina 113