Adtran 1000R Series Manual de usuario descargar pdf (Pagina 105)

Command Reference Guide Enable Mode Command Set

debug dialup-interfaces

Use the debug dialup-interfaces command to generate debug messages used to aid in troubleshooting

problems with all dialup interfaces such as the modem or the BRI cards. Debug messages are displayed

(real time) on the terminal (or Telnet) screen. Use the no form of this command to disable the debug

messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 2.1 Command was introduced.

Functional Notes

When enabled, these messages provide status information on incoming calls, dialing and answering

progress, etc. These messages also give information on why certain calls are dropped or rejected. It is

beneficial to use this command when troubleshooting dial backup (in addition to the debug dial-backup

command).

Usage Examples

The following example activates the debug messages for dialup interfaces:

>enable

#debug dialup-interfaces

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 136 137

Sin comentarios

Adtran 1000R Series Manual de usuario Pagina 105