ADTRAN 1204006L1 Manual de usuario Pagina 86

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 198
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 85
Chapter 6. Data Port Configuration
6-6 TSU IQ+ User Manual 61200275L1-1
DSX PORT
Configure these options to be compatible with the T1 service
provided and with the
DSX-1
port’s connection. The menu tree is
shown in Figure 5-2 on page 5-3.
Framing Format (FRAMING)
Setthe framingformatof the
DSX-1
interface tobe compatible with
your T1 service. This information is available from your service
provider. Choices are D4 or ESF.
Line Code (LNE CODE)
Set the line coding of the
DSX-1
interfacetobecompatiblewith
your T1 service. This information is available from your service
provider. Choices are B8ZS or AMI.
Yellow Alarm
E
NABLE
or D
ISABLE
the transmitting of yellow alarms.
Line Length (LBO)
Select the length of the
DSX-1
’s interface cable (in feet) or select
7.5dB. The unit can then calculate the proper output level for the
port. Choices are 0
TO
133; 133
TO
266; 266
TO
399; 399
TO
533;
533
TO
655 and 7.5 dB.
In-Band Loopback (LOOPBACK)
E
NABLE
or D
ISABLE
the unit’s ability to accept in-band loop-up or
loop-down codes (per ANSI T1.403 specifications) which may be
sent through the
DSX-1
interface. This loopback is a line loopback.
Robbed Bit Signaling (ROBBED BIT)
Set R
OBBED
B
IT
S
IGNALING
to match the settings of the device
connected to the
DSX-1
port.
Vista de pagina 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 197 198

Comentarios a estos manuales

Sin comentarios