ADTRAN 1204006L1 Manual de usuario descargar pdf (Pagina 40)

Chapter 2. Installation

2-2 TSU IQ+ User Manual 61200275L1-1

The following items are included in ADTRAN shipments of DBU

cards:

•DBUcard

• An 8-position modular to 8-position modular cable for the

4-wire SW56, ISDN, or PRI DBU options or an 8-position

modular to 4-position modular cable for the V.34 DBU option

Customer Provides

The customer must provide a male V.35 interface cable.

For SNMP management not accessed through the

V.35

Network

port, the customer must provide access to the TSU IQ+ either

through a SLIP, Async PPP (requires a male 25-pin D-type

connector), ora through the

10BaseT Ethernet

port (requiresthat an

ADTRAN Ethernet card be installed in the TSU IQ+). See Pinouts

on page A-1 for the pin assignments of the C

ONTROL

port (for SLIP

and Async PPP) and the E

THERNET

port.

Power Up

The TSU IQ+ is provided with a captive 8-foot power cord,

terminated by a three-prong plug which connects to a grounded

115 VAC power receptacle.

REAR PANEL

The rear panel contains a DTE connector which provides primary

channel

V.35

. An 8-pin Network jack, Test Jacks, a DSX-1 port, a

Control port, a captive power cord, and a power switch are also

located on the rear panel. Pin assignments for these connectors are

PowertotheTSUmustbeprovidedfromagrounded115VAC,60Hz re-

ceptacle.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 197 198

Sin comentarios

ADTRAN 1204006L1 Manual de usuario Pagina 40