ADTRAN Quintum Tenor AS Manual de usuario descargar pdf (Pagina 8)

13. Using an FTP program, upload this file to /ivr/English on the gateway.

14. Reboot the gateway.

Configuring the Phones

To configure the phones to use the SSG gateway, the outbound proxy must be set in the configuration file

or manually configured on the phone’s web interface. Depending on the architecture of the survivability

solution, you may need to modify either the per-phone config file or the all phone config file.

Aastra SIP Telephones

1. Navigate to C:\Program Files\ADTRAN\NetVanta UC

Server\Data\System\PhoneTypes\Aastra.

2. In Notepad, open template.cfg.

3. Find sip outbound proxy: and enter the IP address of the gateway after the colon.

For example: sip outbound proxy: 192.168.8.49

4. Save and close the file.

5. Restart the NetVanta UC Server Application Service.

a. Start > Control Panel > Administrative Tools > Services.

b. Scroll down and select NetVanta UC Server Application Services.

c. Right-click the entry and select Restart.

6. Restart the phones either manually or from the UC client.

Cisco SIP Telephones

Cisco 7940, 7960 SIP Telephones

1. Navigate to C:\Program Files\ADTRAN\NetVanta UC Server\Data\System\PhoneTypes\Cisco

(7940, 7960).

2. In Notepad, open SIPDefault.cnf.

3. Find outbound_proxy: "" and enter the IP address of the gateway between the quotes.

For example: outbound_proxy: "192.168.8.49”

4. Save and close the file.

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

ADTRAN Quintum Tenor AS Manual de usuario Pagina 8