ADTRAN Quintum Tenor AS Manual de usuario descargar pdf (Pagina 4)

7. Use the CD command to change to the cfg/sys directory (this is the directory on the Tenor into

which you will copy the license.dat file). Depending upon the product type and software

revision, the directory structure you see in your Tenor VoIP device may be different.

8. Type bin <Enter>.

9. Type put license.dat <Enter>

10. Type get reset.sys <Enter> (In order for the upgrade to take effect, you must reset the unit. You

can reset now or wait until the next time you log in).

Configuring SSG

To configure your gateway with SSG, you must use the Quintum Tenor Configuration Manager.

WARNING: When configuring the SSG, you must configure the SIP Server (Primary, Secondary, or

both) even if you are not using the FXO/FXS interfaces.

1. Launch the Tenor Configuration Manager and connect to the Tenor in which the SSG feature is

supported.

2. Select the Advanced Explore tab.

3. From the main panel select VoIP Configuration > Survivability Parameters. The Survivability

Parameters window is displayed.

4. In the Listening Port field enter a port number. The default port is 5060.

5. Ensure the Use My Gateway radio box is checked. If you choose to disable this option, the Default

Route IP address field is displayed. (The Default Route IP Address is a static route destination for

calls when Use My Gateway is disabled.)

6. Enter a Default Route Port (the default is 5061).

7. In the Endpoint Expires Time enter 4800. This ensures that the gateway does not drop phone

registrations prematurely.

8. Select Confirm/OK.

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

ADTRAN Quintum Tenor AS Manual de usuario Pagina 4