ADTRAN NetVanta 7000 Series Manual de usuario descargar pdf (Pagina 11)

NetVanta 7000 Series Release Notes R10.8.1 Errata - Call Control

Errata - Call Control

The following is a list of Call Control errata that still exist in AOS version R10.8.1

• Voicemail to email may fail with a socket error when using TLS.

• Invalid options are presented in the GUI drop-down menu for setting the switch type in the PRI settings.

• The Shared Line Accounts GUI menu incorrectly displays a configuration option for Codec Outbound

Group. This is not a valid configuration option.

• The GUI incorrectly states that System Mode coverage can be set to Busy, when in actuality it would use

the Default Mode coverage.

• The System Summary GUI menu is not displayed when the NetVanta 7100 is running NetVanta 6355

firmware.

• The platform displays as unknown in the GUI when the NetVanta 7100 is running NetVanta 6355

firmware.

• Auto-link client traffic may negatively impact performance because it is not being discarded under heavy

call volume.

• When configuring the CODEC Group setting for a SIP trunk in the GUI, if <default> (G.711 uLaw) is

selected, the output of a show run in the CLI will show no codec-group is configured.

• When using Internet Explorer, the Apply button on the Voice > IP Phone Globals > Default Settings tab

will not function. Workaround: Use Firefox, Chrome, or Safari to apply changes on this GUI page.

• Inbound calls from Megapath (Broadsoft) SIP trunks fail to be delivered by FindMe-FollowMe to

external numbers. Calls roll to next Call Coverage item after being answered at the external number.

Workaround: Enable Ringback Only and disable the Accept option in the FindMe-FollowMe

configuration for the call to external party to be successful.

• Caller ID may not be correctly sent when an SLA/SCA call is transferred to an extension.

• Successive reINVITE SIP messages to place a call on hold will be rejected with a 400 Bad Request

response if incoming music-on-hold is enabled on the SIP trunk.

• transport=TCP is incorrectly included in the Contact header on a UDP SIP trunk.

• SLA accept/reject templates do not affect calls sent using the SLA.

• Call coverage set to internal will still allow calls to be routed out an external trunk.

• FindMe-FollowMe fails with Single Number Reach service in NetVanta BCS.

• When a voice user is configured for an empty caller ID number, the name is also not transmitted.

• Configuring a user to have Dialtone Only message waiting does not result in a SIP NOTIFY message to

the SIP endpoints when a new message is waiting.

• When configuring call coverage, setting the Ring Extension to Never results in a three-second delay

delivering voice traffic to the ADTRAN phone.

• A SIP Trunk configured to replace the diversion header is not correctly replacing the most recent

diversion header when multiple diversion headers are present.

• Attempting to ring external numbers through FindMe-FollowMe fails and disconnects the caller if the

press-to-accept option is disabled. Workaround: Enable the press-to-accept option for external numbers,

or alternately use the Refer the call to action for external numbers.

• Inbound calls are not correctly routed to a SIP identity when configured on an auto attendant.

1 2 ... 6 7 8 9 10 11 12 13

Sin comentarios

ADTRAN NetVanta 7000 Series Manual de usuario Pagina 11