ADTRAN Tracer TRACER 2 x E1 Guía de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 112
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
fcs
Syntax fcs (16 | 32);
Hierarchy Level [edit interfaces e1-fpc/pic/port],
[edit interfaces t1-fpc/pic/port],
[edit interfaces interface-name ds0-options],
[edit interfaces interface-name e1-options],
[edit interfaces interface-name e3-options],
[edit interfaces interface-name sonet-options],
[edit interfaces interface-name t1-options],
[edit interfaces interface-name t3-options]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers.
Description For E1/E3, SONET/SDH, and T1/T3 interfaces, configure the frame checksum (FCS) on
the interface. The checksum must be the same on both ends of the interface.
On a channelized OC12 interface, the SONET/SDH fcs statement is not supported. To
configure FCS on each DS3 channel, you must include the t3-options fcs statement in
the configuration for each channel. For SONET/SDH, the channelized OC12 interface
supports DS3 to STS-1 to OC12. For SDH, the channelized OC12 interface supports NxDS3
to NxVC3 to AU3 to STM.
NOTE: When configuring E1 or T1 interfaces on 10-port Channelized E1/T1 IQE
PICs, the fcs statement must be included at the [edit interfaces e1-fpc/pic/port]
or [edit interfaces t1-fpc/pic/port] hierarchy level as appropriate.
Options 16—Use a 16-bit frame checksum on the interface.
32—Use a 32-bit frame checksum on the interface. Using a 32-bit checksum provides
more reliable packet verification, but some older equipment might not support 32-bit
checksums.
Default: 16
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
Configuring the E1 Frame Checksum on page 9
Configuring the E3 Frame Checksum
Configuring the SONET/SDH Frame Checksum
Configuring the T1 Frame Checksum
Configuring the T3 Frame Checksum
45Copyright © 2014, Juniper Networks, Inc.
Chapter 4: Statement Summary
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 111 112

Comentarios a estos manuales

Sin comentarios