ADTRAN NetVanta 1000R Series Especificaciones descargar pdf (Pagina 136)

Command Reference Guide Enable Mode Command Set

debug ppp [authentication | errors | negotiation | verbose]

Use the debug ppp command to activate debug messages associated with point-to-point protocol (PPP)

operation in the AOS. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the

no form of this command to disable the debug messages.

Syntax Description

authentication Activates debug messages pertaining to PPP authentication (CHAP, PAP, EAP,

etc.).

errors Activates debug messages that indicate a PPP error was detected (mismatch in

negotiation authentication, etc.).

negotiation Activates debug messages associated with PPP negotiation.

verbose Activates detailed debug messages for PPP operation.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

The debug ppp command activates debug messages to provide information on PPP activity in the system.

PPP debug messages can be used to aid in troubleshooting PPP links.

Usage Examples

The following example activates debug messages associated with PPP authentication activity:

>enable

#debug ppp authentication

1 2 ... 131 132 133 134 135 136 137

Sin comentarios

ADTRAN NetVanta 1000R Series Especificaciones Pagina 136