ADTRAN FNID Información técnica descargar pdf (Pagina 16)

Configuring ITM and Top Traffic Using the GUI Integrated Traffic Monitoring

Traffic flow data can be sent to two different destinations or port configurations. When specifying the

destination of traffic flow exports, several parameters can be included. To configure traffic flow export,

follow these steps:

1. Select the Export tab from the Traffic Monitoring menu.

2. Enter the IP address of the external data collector in the Destination Address field.

3. Enter the port destination for the ITM data in the UDP Port field.

4. In the Source Interface (optional) field, specify the interface from which to export data packets.

5. Select Add at the bottom of the menu. Added destinations will appear below the Add

button.

If using a VRF destination, the source interface must be on the same VRF as the

destination interface or it will be ignored. If the source is ignored, the routing table will

determine the source interface.

For more information on VRFs, refer to the Configuring Multi-VRF configuration guide

available on the AOS Documentation CD shipped with your AOS product, or available on

the Web at www.adtran.com.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 49 50

Sin comentarios

ADTRAN FNID Información técnica Pagina 16