ADTRAN ATLAS 800PLUS Manual de usuario descargar pdf (Pagina 32)

Chapter 2. Installation

2-6

ATLAS

_800

PLUS

User Manual 61200226L1-1

Ethernet 10BaseT Connection

The 10BaseT port (RJ-48C) provides an Ethernet LAN connection, which is used

for TFTP, SNMP, and Telnet connection. See Table 2-4 on page 2-6 for the pinout.

Connection

The network connection is as follows:

MON (Monitor)

The MON test jack provides a bridged access jack for non-intrusive monitoring of

the T1 circuits receiving data. When connected to this jack, the test equipment

should be configured for a bridged termination.

Table 2-3. Network Pinout

PIN NAME DESCRIPTION

R1 RXDATA-RING Receive data from the network

T1 RXDATA-TIP Receive data from the network

UNUSED —

R TXDATA-RING Send data toward the network

T TXDATA-TIP Send data toward the network

6,7,8

UNUSED —

Connector type

(USOC) RJ-48C

Part number

AMP# 555164-2

Table 2-4. Ethernet 10BaseT Pinout

PIN NAME DESCRIPTION

TX1 Transmit Positive

TX2 Transmit Negative

RX1 Receive Positive

4 & 5

UNUSED —

RX2 Receive Negative

7 & 8

UNUSED —

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 165 166

Sin comentarios

ADTRAN ATLAS 800PLUS Manual de usuario Pagina 32