ADTRAN 600 SERIES Manual de instrucciones descargar pdf (Pagina 23)

Total Access 600R User Interface Guide (UIG)

SYSTEM CONFIG

Set up the Total Access 600R operational configuration from the S

YSTEM

ONFIG

menu. Figure 4 shows the items

included in this menu.

Figure 4. System Config Menu

SYSTEM CONFIG>OPERATING MODE

For the T1 TDM application, the mode will be displayed as Channel Bank.

SYSTEM CONFIG>T1 TIMING MODE

The

T1 T

IMING

ODE

choices are

ETWORK

and

NTERNAL

Select

ETWORK

if the TELCO is providing clocking on the

T1 line. Select

NTERNAL

if there is no timing on the T1 circuit and the 600R will have to provide the clock. Default is

ETWORK

SYSTEM CONFIG>TELNET ACCESS

Sets Telnet access to

. The factory default value for this parameter is

SYSTEM CONFIG>TELNET USER LIST

SYSTEM CONFIG>TELNET USER LIST>NAME

Up to four users can be configured for access to the 600R. Each user can be assigned a security level and time out.

The name is a text string of the user name for this session. You can enter up to 15 characters in this field. The factory

default is no entry in the

AME

field

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 73 74

Sin comentarios

ADTRAN 600 SERIES Manual de instrucciones Pagina 23