ADTRAN 1200080L1#HS Manual de usuario descargar pdf (Pagina 24)

Chapter 3. Operation

20 FXS+ Dual Voice Option Module 61200.080L1-1

Fault Resp (Fault Response)

Fault Resp is used to set the 2-wire response to a carrier

alarm. For a network alarm, the ground start 2-wire

trunk would appear busy if Fault Resp is set to seized. If

set to normal, no seizure of a ground start trunk occurs.

Choices include:

• Normal

• Seized

Tandm Options (Tandem Options)

Some options are valid only when operating in the

tandem mode. These options are provided below.

• Supervision

Supervision sets the supervision method used when

the card is configured to operate in the Tandem mode.

Choices include:

- Immediate

- Wink

• Dial Tone

Dial Tone is used to enable or disable the on-board

dial tone generation when the FXS+ is operating in the

tandem mode. When the on-board dial tone genera-

tion is enabled, the dial tone will turn off after a five

second time-out.

Choices include:

- Enabled

- Disabled

• Loop Reverse Battery

This option causes the polarity of tip and ring to be

reversed when the far-end answers and the FXS+ card

is set to TANDEM_LS mode. This provides answer

supervision to the 2-wire port.

Choices include:

- Enabled

- Disabled

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Sin comentarios

ADTRAN 1200080L1#HS Manual de usuario Pagina 24