Adtran Gigabit Ethernet Single-Mode Fiber Tributary Modul Manual de usuario descargar pdf

DESCRIPTION

The Single-Mode Gigabit Ethernet (GigE) Small Form-

Factor Pluggable (SFP) plugs into ADTRAN GigE modules

designed to accept SFPs. The SFP provides an optical

interface to the GigE physical interface. Installed into an

appropriate host module, the SFP provides a GigE

tributary interface to the supporting system.

NOTE: To ensure compatibility, refer to the documentation

provided with the host module.

♦ 1000Base-ZX: 1550 nm, single-mode, 2 fiber

operation

♦ Maximum optical distance: 80 km

CAUTION: Due to compliance certification requirements,

only SFPs supplied by ADTRAN are to be used

with ADTRAN modules. ADTRAN cannot certify

system integrity with other SFPs.

Operational Specifications

♦ Optical Specifications:

– Optical transmit level: +5 dBm to 0 dBm

– Optical receive level: –3 dBm to –23 dBm

– Optical budget: 22 dB

– Optical connectors: LC

♦ Extended Environmental Support:

– Operational Temperature Range: –20°C to +85°C

– Storage Temperature Range: –40°C to +85°C

– Relative Humidity: 95%, noncondensing

CAUTION: The transmission distance is indicative only. An

in-line optical attenuator should be inserted

between the fiber-optic cable plant and the

receiving port on the transceiver, according to the

following guidelines:

• Fiber span of 0 – 25 km: 10 dB attenuator

• Fiber span of 25 – 50 km:5 dB attenuator

• Fiber span of 50 – 80 km:no attenuator

INSTALLATION

To install the SFP into an appropriate module, complete

the following steps:

1. Inspect the SFP. If damaged, file a claim with the

carrier and then contact ADTRAN Customer Support.

2. Remove the safety cap from the optical connectors of

the SFP.

3. Insert the SFP into the receptacle on the circuit

board of the host module, with the manufacturer’s

label facing outward. Slide the SFP all the way into

the receptacle.

4. Use thumb and forefinger to squeeze the receptacle

and SFP together, to ensure a proper connection.

NOTE: The latch on the SFP is for removal only.

5. Continue the installation and turn-up of the host

module using the instructions in the Job Aid

provided with that module, or using the Installation

and Maintenance Practice (I&M), available online at

www.adtran.com

PROVISIONING

The SFP is not directly provisionable. To provision the

SFP, access the menu system of the host module. For

more information, refer to the Job Aid or I&M of the host

module for provisioning details.

CLEI: SOOTAHCJ_ _

Product P/N: 1184562PG5

Issue Date: 0804

Document P/N: 61184562PG5-22A

Small Form-Factor Pluggable

Single-Mode Gigabit Ethernet, 80 km

1 2

Small Form-Factor Pluggable 1

Indice de contenidos

Pagina 1 - Small Form-Factor Pluggable

DESCRIPTIONThe Single-Mode Gigabit Ethernet (GigE) Small Form-Factor Pluggable (SFP) plugs into ADTRAN GigE modules designed to accept SFPs. The SFP p

Pagina 2

NOTE: The Gigabit Ethernet port is optical and therefore is not classified as any type of port as defined in Appendix B of GR-1089-CORE Issue 4.The SF

Comentarios a estos manuales

Sin comentarios

Adtran Gigabit Ethernet Single-Mode Fiber Tributary Modul Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Adtran Gigabit Ethernet Single-Mode Fiber Tributary Modul. ADTRAN Gigabit Ethernet Single-Mode Fiber Tributary Module 1184518L1 User Manual [en] Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Adtran Gigabit Ethernet Single-Mode Fiber Tributary Modul